<samp id="emoo6"><tfoot id="emoo6"></tfoot></samp>
<samp id="emoo6"></samp>
<th id="emoo6"></th>
<samp id="emoo6"><pre id="emoo6"></pre></samp>
NIKE CFA APPAREL EXAM
您的姓名：
您的部門：
QE Q1
QE Q2
QE O1
QE O2
QE R1
財務部
生產部
法務
行政
1、For color evaluation, during production, using D65 day light, which are the limits for color parameters measurement?
Delta E=1.5; DeltaL=0.9; Delta C&H=0.9
Delta E=0.7:DeltaL=1.2: Delta C=0.7:Delta H=0.5
DeltaE=1.1;DeltaL=1.0; Delta C&H=0.5
DeltaE=1.2:DeltaL=0.87: DeltaC=0.7;Delta H=0.5
2、What is the purpose of Garment Wash test?
All are correct
To check for possible failures on the aesthetics of the after-washed garment.
To determine the Dimensional Stability and after-washed appearance of the garment, using home laundering conditions
To check the Colorfastness.
3、What is kind of testing for snap button attachment?
Sharp testing
Torque & Tension testing
Small part testing
Dye Migration testing
4、In a Garment Wash Test, when the color change failed to meet Nike's requirement, what should factory do?
Re-do the garment wash test with other colorway, and continue production.
Ignore the test results and continue production.
Hold production, work with fabric supplier to resolve problem; if the problem cannot be resolved, factory informs Nike
Proceed with production and contact fabric supplier and Nike
5 How customer returns can pe used to improve Quality Management System of the factory ?
A. Charging cost to the factory.
B. lt is impossible to have zero returns, so if return level is low. nothing to be done
C. Information from customer returns need to be used classifying main defects and styles with more incidence to reinforce contros and review processes.
D. Applying advertence to the production sector with more defects observed 0 the field
6.According to the procedure, can factory proceed bulk production without an approved QPP/QRS?
A. Yes, if the style is carried-over or isa take-on style.
B. No, it is against procedure.
C. Yes, as long as there is Pl signature on the QPP/QRS tag.
D. Yes, if factory is willing to take the risk.
7.Where is the placement of hangtag for different types of products?
A. Size tab on neck
B. Loop label
C. Zipper slider
D. Refer to hangtag placement guideline. Please also check Nike Connect
8.What are the 3 critical parameters for the application of Heat Transfers?
A. Pressure, Fabric and Glue
B. Pressure, Time and Temperature
C. Pressure, Time and Fabric
D. Gauge, Storage and Fabric
9.Which of following is the best statement about a SPEC?
A. To identify the placement of logo only.
B. To identify the grade rule only.
C. All of the above is WRONG
D. To know the construction details and measurements.
10.What is the illumination recommended for the audit workspace?
A. 1,050 lux
B. 1,025 lux
C.1,000 lux
D. 1,075 lux
11.For Carry-Over styles, how long is the QRS sample valid?
A. Maximum 4 calendar years.
B. Maximum 3 calendar years
C. Maximum 2 calendar years.
D. Maximum 1 calendar year.
12.What of the following statement is true of the“30-minute Lesson”?
A. The time to re-work and improve the defects found in the current production line, should not be more than 30 minutes.
B. Let all operators know what types of defect are the most common for the current style.
C. To keep the operator aware of the current defects.
D. All statements are correct
13.When there is a reiection from Nike Customer Service Center (CSC), which of the following action should you take?
A. Say sorry to Nike Product Integrity (PI).
B. Check which production line produced the reject and blame the Line Supervisor.
C. Report to the Production Manage! that you are not the one who conducted final audit.
D. Check any buy/PO that is still under production. Take immediate containment, corrective and preventive actions.
14.During inspection of garment in sets (op &Bottom), you found a defect on the Top. What should you do?
A. Discontinue inspection for the Bottom and this will be counted asone defect.
B. Continue to check the Top, then check the Bottom.
C. Continue inspection for the Bottom.
D. Continue check the top and if you don`t found any defect that no defect for this sets
15.After Buy Ready, what is the correct sequence of Reeference Samples that Factory needs to
produce ?
A. Development Reference Sample Size Set/TOP(nternal)or EPS(Early Production Sample to Nike)/Qualified Reference Sample(QRS)or Qualified Pre-Production Sample(QPP)
B. Development Reference Sample /Qualified Reference Sample(QRS)/Qualified Pre-Production Sample(QPp), Size Set.
C. Development Reference Sample Size Set /QRS (Qualified Reference Sample) or QPP(Qualified Pre-Production)/TOP(Internal)or EPS (Early Production Sample to Nike)/F.M.L
D. Development Reference Sample /D.Size Set /F, M,L/Qualified Reference Sample(QRS) orQualified Pre-Production Sample
16.What does F/M/L stand for?
A. Former/Middle/Latter
B. First/Medium/Large
C. First/Middle/Last
D. None of these statements is correct.
17.How many points must a needle detector calibration kit be positioned, in the conveyor belt tunnel ?
A. 9
B. 12
C. 3
D. 6
18.How does a factory select Screen Print/Heatransfer/similar embellishment strike-offs for RSl seasonal tests?
A. 5% by Style with the highest production volume.
B. 2% by Style with the highest production volume.
C. 2% by Colorway with the highest production volume.
D. 5% by Colorway with the highest production volume.
19.When TOP sample must be generated by the factory ?
A. At production beggining, one unitfrom each cell must be inspected and approved. This piece mustremain in the cell the entire time this style is being produced, as iserves as a reference for production.
B. When new styles of the season start to be produced.
C. When Nike Developer ask production sample.
D. According factory decision to produce or not TOP
20.For a dut with non-functiona orawcoro arouno the hood(cord which do not cause gathering) the hanging length of the cord must not exceed how many cm?
A. 15cm
B. 14cm
C. 13cm
D. 12cm
21.What is the definition of QRS ?
A. Reference sample for production.
B. All statements are correct
C. Minimum acceptable workmanship
standard.
D.ls made at the actual manufacturing facility.
22.Which type of Metal Detectors must all factories have?
A. Hand-held & Conveyor belt
B. Hand-held
C. Table-top detector & Hand-held
D. Conveyor Belt
23.Which of the following statement is correct for China shipment ?
A. All are correct
B.CFA only conducts final inspection after receiving pass test report.
C. All items in Final Inspection Check list are “OK”.
D. Test sample should be sent out for testing at least 14 days before shipdue date.
24.here Validation Tests (Garment Durability Embellishment Durability/Garment Packed Storage Test) shall be done ?
A. Shall be sent to Nike Apparel LAB(NAL) for Test
B. Always on Factory Internal LAB
C. Any Textile LAB available at Factory Country Can pe done at nterna Factory
D. LAB (if Certified by ITS) or need to be sent for ITS Unit indicated by Nike
25.If the color does not meet Nike's color standard but it is approved by Nike, it is :
A. Exceptional Approved
B. Conditional Approved
C. Normal Approved
D. Limited Approved
26.How do you select garments for taking measurements?
A. One size and one colorway
B. Any size or color way
C. Only one color way for all sizes
D. Spread evenly across available colors and sizes
27.What is the MAlN purpose of auditing the T.O.P sample?
A. To ensure that the F/M/L samples are made correctly.
B. This is part of the inspector's job.
C. To ensure that the T.O.P sample is available for Nike Pi's check.
D. To ensure that the 1st piece of the bulk production is made correctly.
28.According to China Requlation checklist, which of the following items need to be checked?
A. Care & content label, China insert hangtag, corporate woven label.
B. Care & content label. UPC sticker, corporate woven label.
C. China insert hangtag, UPC sticker, corporate woven label.
D. Care & content label, China insert hangtag, UPC sticker, corporatewoven label.
29.When performing the Heat Transfer Stretch Test what is the distance between the heat transfer graphic to the hand grip area?
A.5 mm
B. 15 mm
C. 10 mm
D. 10 cm
30.What is Nike's standard for the sensitivity of the Metal Detector ?
A. 1.12 mm
B. 1.0 mm
C. 1.0 mm and 1.12 mm
D. 10.0 mm
31.The QRS had been reiected 2 times due to body length measurement discrepancy. Production Manager/relevant personnel told you that they have measured the garment and the measurement is as per specification. what should you do?
A. To avoid further argument with the Production Manager/relevant personnel, accept the QRS and wait for Nike Pl to review.
B. Insist on a 3rd submission of QRS since you know that you are right.
C. Check with the Production Manager/relevant personnel toensure that both parties are using the same measurement code/method and resolve the issue before the 3rd submission of QRS
D. All of the above are correct
32.Please classify below defects into categories; Needle holes, Open seam, Damages polybag, Missing CNC label & untrimmed thread
A. Packaging, Cleanliness. Construction. Construction & Construction.
B. Construction, Construction. Packaging, Labelling & Cleanliness
C. Packaging, Construction, Construction & Construction, Cleanliness
D. Construction, Fabric, Construction, Packaging & Cleanliness
33.If one Tee-Shirt has a small hole on the fabric at the back panel with 1mm diameter, this product must be classified as:
A. C-Grade
B. None of the above is correct
C.B-grade
D. A-Grade
34.Which are the documents CFA need to use toverify measurements of the garment ?
A. Check Nike Technical Documents provided during Development phase(such as Style Tech Sheets and Specs)
B. Style BOM
C. Factory Intern at Measurement Sheet
D. Comp are measurement to style from previous season
35.When use of drawcord is allowed, which type of drawcord is preferred for Children's products?
A. Non-elastic drawcord
B. Elastane drawcord
C. Elastic drawcord
D. Spandex drawcord
36.Which of the following should you refer to inconducting a final audit?
A. BOM, Spec, Trim card.
B. BOM, Spec, QPP/QRS, Nike Test Methods.
C. BOM, Spec, GlS, QPP/QRS, Trims Card.
D. Internal translated documents, QPP/QRS.
37.What is the percentage to inspect if lot quantity is less than the sample lot?
A.50% inspection
B.100% inspection
C.75% inspection
D.80% inspection
38.Which of the following, is not a B-graderequirement ?
A. To be packed separately from A-grades.
B. To be packaged exactly as A-grades.(ie, with UPC, polybagoutside carton information, nomixed sizes etc.).
C. Cartons must be identified.(B.grade sticker on carton).
D. Remove loop label from the garment.
39.For AQL 1.0 and sample size=1.200, Accept =2. Reject = 3. After the audit, the number of defectives is 4 pieces and your Packing Managetold you that he has no time to re-check 100%because the lorry is waiting. What should you do?
A. Release the shipment as per the Packing Manager's advice.
B. Release the shipment as the defect types are not very serious.
C. Hold the shipment and ask for100% re-check.
D. Release the shipment since there rjected quantity exceeded the accepted number by 1 only.
40.What is the MAlN purpose of auditing the F/M/L samples?
A. To ensure that the F/M/L samples are available for Nike Pi's check
B. This is part of the inspector's job.
C. To ensure that the 1st piece of the bulk production is made correctly.
D. To ensure that the bulk production quality is consistent
41.Which of the following, is not a B-grade requirement ?
A.Cartons must be identified.(B-grade stickeron carton).
B. To be packaged exactly as A-grades. (ie, withUPC, polybag, outside carton information, nomixed sizes etc.).
C. To be packed separately from A-grades.
D. Remove loop label from the garment
42.Please cassify below defects into categories, Needle holes, Open seam, Damages polybag, Missing CNC label & untrimmed thread
A. Packaging, Construction, Construction &Construction, Cleanliness
B. Packaging, Cleanliness, Construction, Construction & Construction.
C. Construction, Fabric, Construction, Packaging& Cleanliness
D. Construction, Construction, Packaging,Labelling & Cleanliness.
43.What kind of sticker should you place at the side mark of a Japan export carton and which carton should you insert the metal detection report?
A. Barcode sticker and last carton.
B. Japan UPC sticker and 1stcarton.
C. MD sticker and last carton.
D. Japan UPC sticker and last carton.
44.Question 44 of 50
If a style can pass Metal Detection at 1.2mm only, what should the factory do?
A. None of the above is correct
B. Inform Nike Pl.
C. Tick the appropriate item on the QPP/QRS tag so that Nike isaware.
D. Inform Nike PCC to add the lM#511829 -“Style passed Hand-held Metal Detection"in BOM.
45.
What is the difference between EMEA andCanada UPC sticker ?
What is the difference between EMEA andCanada UPC sticker ?
A. EMEA with additional barcodefor country of origin.
B. Canada with additiona suggested retail price(MSR)
C. Canada with additiona barcode for country of origin.
D. EMEA with additional suggested retail price (MSR).
46.Which of the following item is not requiredon a China CNc label ?
A. Country of Origin
B. Factory Code
C. Gender
D. Fabric Content
47.What of the following is correct about QPPsample?
A. The garment wash test must pass before QPP is approved
B. Qualified Pre-production sample.
C. All of the above are correct
D. QPP is approved by Nike.
48.Which of the following is WRONG statement for Metal Detection process ?
A. Meta detection shou d peprocessed in a separate areaand free from electric and electronic interference.
B. Conveyor belt detector musthave audio alarm and equippedwith an automatic stop processwhen meta is detected.
C. Factory must have Table-top detector.
D. Factory must have Needle Detector calibration kit with 1.00mm diameter steel ball
49.For GFA/GFB (Global Football), where Validation Tests(Garment Durability Embellishment Durability/Garment Packed Storage Test) shall be done ?
A. Any Textile LAB available at Factory Country
B. Can be done at Internal Factory LAB (if Certified by ITS) or need to be sent for ITS Unit indicatedby Nike
C. Shall be sent to Nike Apparel LAB(NAL) for Test
D. Always on Factory Internal LAB
50.Which of the following label must appearon the side mark of the carton?
A. MSR label.
B. UPC sticker.
C. UCC 128 label
D. Barcode label
51.How do you assure that the incoming trims meet Nike's expectation?
A. Comparing to TRM used on other brand.
B. Calling Factory Product Developer
C. Checking against BoM description.
D. Checking against lmages from Internet
關閉
更多問卷
復制此問卷